在线客服

Formtec NCspeed 5.1.0.4 加工材料

  • 软件等级:
  • 更新时间:2009-06-14 14:56:05
  • 软件类型:国外软件
  • 软件大小:请和我们联系得知
  • 软件语言:英文
  • 软件授权:正式版
  • 软件类别:其它软件 - 模具雕刻
  • 应用平台:具体软件,请联系我们得知

软件介绍

Formtec NCspeed 5.1.0.4 加工材料

一款模仿并解析如何加工材料的工具.可以模仿3到5轴系处理加工过程,它考虑到机器的运行时间和安全系数,在可能的情况下还可以检查工具路径.软件工作原理: 1.考虑到磨损程度,磨损越小越好. 2考虑到耐久性,工作的时间越久越好. 3考虑到零件之间障碍/震动.协调之间的工作.此软件可运用于发动机等方面的解析. Your daily business is to manufacture complex dies and molds. To be fast and cost-effective, you need seamless integration of CAM system, machine/controls and milling tool. We help you to tap into the unused potential of your manufacturing equipment. Continuously adjusting the feedrate to varying engagement conditions allows better operating conditions for both machine and tool. Milling times can be reduced by up to 20%. This translates into real cost savings and substantial lead time reductions. What is NCspeed NCspeed is a software system for the simulation of 3- and 5-axis milling processes. The milling process is optimized with regard to machining time and process safety. Furthermore the checking of toolpath is possible. Working method Based on a volumetric simulation NCspeed can analyze the material removal process during milling. This principle enables a visual checking of the milling process. NCspeed shows for this purpose a shaded display of the continuously machined geometry. Due to this, it is possible to detect faults in the NC-program before a machining crash occurs. The optimisation component of NCspeed calculates the material volume to be cut by the milling cutter and adjusts the feedrate to the actual engagement conditions. The more material is to be cut, the slower is the feedrate and vice versa. Based on this principle a new feedrate profile is generated. NCspeed works as a postprocessor. A toolpath is reading, additional feedspeeds are inserted and the optimised program is written back. All common toolpath formats like DIN/ISO, Heidenhain conversational and APT- can be used. The toolpath generated by NCspeed are of the same dialect as the original ones. What is NCspeed NOT NCspeed is no CAM-system. You can optimise existing toolpath but you can not generate completely new toolpath. Basically NCspeed inserts new feed commands. The geometry of milling paths is not changed. The milling machine will move the same way as with the original program. The only exceptions to this are the air cut removal and the optimisation of the path connections. When should NCspeed be used The usage of NCspeed is recommended whenever the maximum usable feedrate in the milling process is limited by the cutter. E.g. the machine can perform a feedrate of 10000 mm/min with sufficient accuracy. The tool is only capable of performing a feedrate of 2000 mm/min to avoid tool damage in critical areas. In this case the maximum feedrate is limited by the tool and NCspeed offers a significant optimisation potential. If the machine is already working at the feed limit, the feedrate optimisation can offer no (or only small) advantages. Presumed, you are machining an easy to cut material, the maximum feedspeed of the machine is 10000 mm/min and this feedrate is actually chosen. Because NCspeed cannot change the physical capabilities of the machine, the optimisation potential will be low. There are three exceptions: The usage of very small cutters. In this case the danger of tool break is present. NCspeed can increase the process reliability significantly by avoiding of tool break. Usage of long, thin cutters. This can lead to high tool deflections, resulting in unsatisfactory accuracy. NCspeed can minimize the cutting forces avoiding larger tool deflections. Chatter vibrations, which often occur, when using long, thin cutters. NCspeed recognize typical situations where vibrations can occur. and adapts the feedrate to avoid these vibrations.
 

网友评论

   评论摘要(共 0 条,得分 0 分,平均 0 分) 查看完整评论

用户名: 验证码:

分 值:100分 85分 70分 55分 40分 25分 10分 1分

内 容:

         软件若有错误,请打勾通知网站管理员